Overview of SilverStar SCS¶
Work environment¶
Use 220V AC in ±10% ranges.
Please keep the product away from the high electromagnetic interference.
Please operate in the area which temperature is 5℃~45℃.
Please operate in the area which humidity is 80% or less.
Please keep the product away from the flammability and exploder.
Notice of installation¶
The control box should be installed correctly follow the instruction in this manual.
Turn off the power and unplug the cord before installation.
To wire must not set to be near the wheel and other movable parts.
To avoid the static interference and current leakage, all grounding must be done.
Notice of safety¶
Turn off the power before maintenance and repair or raising the machine arms, or changing needle, or threading needle.
Do not open the box except the professional.
When turn on the controller in the first time, use low speed to operate and check the correct rotation direction.
During machine operation, don’t touch any moving parts.
All moving parts must use the protective device to avoid the body contact and objects insertion.
When there is water or other liquid, or caustic material on box or motor, you must stop operation and turn off the power.
All connector shouldn’t be plug and unplug when power on.
The connector should be plug and unplug in the correct method.
Danger
The power supply is AC 220V !
The yellow-green earth cable must be connected to the earth properly. Otherwise there are risks of human electric shock and the controller doesn’t work properly sometimes.