Safety Sensor

Tilt safety/Finger protection/Hook cover protection.

Tilt safaty switch

Quick reference

This table summarizes which parameter should be used for tilt safaty switch:

Parameter	Authority	See also
Tilt Switch Debounce	Technician	T09
Warning: Tilt safety switch	Technician	O31
Sensor Polarity(Tilt Safety)	Technician	O32

Eye protection

Quick reference

This table summarizes which parameter should be used for eye protection:

Parameter	Authority	See also
Warning: Eye protection	Technician	O28

Slide monitoring

Quick reference

This table summarizes which parameter should be used for slide monitoring:

Parameter	Authority	See also
Warning: Slide monitoring	Technician	O29

Oil Level

Quick reference

This table summarizes which parameter should be used for oil level:

Parameter	Authority	See also
Information: Oil Level	Technician	O34
Oil Level Sample	Technician	O68

Upper Thread Breaking

Quick reference

This table summarizes which parameter should be used for upper thread breaking:

Parameter	Authority	See also
Warning: Upper Thread Break	Technician	A53
Upper Thread Monitor Debounce	Technician	T13
Sensor Polarity(Upper Thread Breaking)	Technician	O92

Parameter List

T09

-Max

1000

-Min

1

-Unit

ms

-Description

Delay for the signal evaluation of the tilt switch input.

O31

-Max

1

-Min

0

-Unit

–

-Description

Whether to throw a warning when the machine is tilted:

0 = Off;

1 = On.

O32

-Max

1

-Min

0

-Unit

–

-Description

Sensor polarity used for detect whether the machine has tilted:

0 = Normal close;

1 = Normal open.

O28

-Max

1

-Min

0

-Unit

–

-Description

Optional features,whether to throw a warning when the eye protection isn’t in the right place:

0 = Off;

1 = On.

O29

-Max

1

-Min

0

-Unit

–

-Description

Optional features,whether to throw a warning when the hook cover plate is removed:

0 = Off;

1 = On.

O34

-Max

1

-Min

0

-Unit

–

-Description

Optional features, whether to throw a information when the lubricating oil level is too low:

0 = Off;

1 = On.

O68

-Max

4095

-Min

0

-Unit

–

-Description

If lubricating oil level sensor signal is analog, and the actual sampling value is lower than this parameter value, a low oil level exception will be thrown.

A53

-Max

1

-Min

0

-Unit

–

-Description

Optional features, whether to throw a warning when the upper thread breaking:

0 = Off;

1 = On.

T13

-Max

1000

-Min

1

-Unit

ms

-Description

Delay for the signal evaluation of the upper thread monitor.

O92

-Max

1

-Min

0

-Unit

–

-Description

Sensor polarity used for upper thread breaking:

0 = Normal open;

1 = Normal closed.