Second stitch length¶
Connect a button and configure its corresponding input port for stitch length switching, allowing you to quickly switch between two stitch lengths.
Speed Limitation when long stitch length activated¶
If parameter O33 set to 1, the speed is reduced down to parameter
S17 when long stitch length activated.
Quick reference¶
This table summarizes which parameter should be used for second stitch length:
Parameter |
Authority |
See also |
|---|---|---|
Second Stitch Length |
Operator |
|
Long Stitch Speed Limit |
Operator |
|
Stitch Length Switching Status |
Technician |
|
Stitch length during backtack |
Technician |
|
Speed limit during long stitch length |
Technician |
|
Full power duration |
Developer |
|
Duty cycle after full power |
Developer |
Parameter List¶
- A46¶
- -Max
1
- -Min
0
- -Unit
–
- -Description
- Second Stitch Length:0 = Off;1 = On.
- S17¶
- -Max
4500
- -Min
50
- -Unit
spm
- -Description
Speed limit when using long stitch length.
- A25¶
- -Max
1
- -Min
0
- -Unit
–
- -Description
Whether the stitch length switching is activated, read only.
- A50¶
- -Max
1
- -Min
0
- -Unit
–
- -Description
- When sewing start or end backtack, automatically switch to small stitch length:0 = Off;1 = On.
- O33¶
- -Max
1
- -Min
0
- -Unit
–
- -Description
- Speed limit during long stitch length:0 = Off;1 = On.
- O78¶
- -Max
999
- -Min
1
- -Unit
ms
- -Description
Second stitch length: Activation duration in time period t1 (100% duty cycle).
- O79¶
- -Max
100
- -Min
1
- -Unit
%
- -Description
Second stitch length: duty cycle after full power in time period t2.