Assemble¶

Attention

If certain parameters in this category are set incorrectly, the machine may have unexpected problems.

Quick reference¶

This table summarizes which parameter should be used for assemble:

Parameter	Authority	See also
Pedal POSITION -1 Function	Developer	`A19`
MACHINE ID	Developer	`O03`
Pedal Type	Developer	`O08`
MACHINE ID Storage Location	Developer	`O30`
Pedal Calibration: POSITION END(Forward)	Developer	`O56`
Pedal Calibration: POSITION 2 and POSITION 1	Developer	`O57`
threshold
Pedal Calibration: POSITION 1 and POSITION 0	Developer	`O58`
threshold
Pedal Calibration: POSITION 0 and POSITION -1	Developer	`O59`
threshold
Pedal Calibration: POSITION -1 and POSITION -2	Developer	`O60`
threshold
Pedal Calibration: POSITION END(Backward)	Developer	`O61`
Pedal Calibration: Schmitt Loop value	Developer	`O62`
Speed Curve Pedal	Developer	`O63`
Type of Keypad	Developer	`O80`

A19¶

-Max: 2
-Min: 1
-Unit: –
-Description: Action performed when the pedal is at half heel-back position:

1 = Sewing foot lift;

2 = Thread trimmer.

O03¶

O08¶

-Max: 1
-Min: 0
-Unit: –
-Description: Select the pedal type:

0 = Native;

1 = Standing Operation Pedal.

O30¶

-Max: 2
-Min: 1
-Unit: –
-Description: Choose where MACHINE ID is stored:

1 = Stored in the controller;

2 = Stored in the machine head.

O56¶

-Max: 4095
-Min: 0
-Unit: –
-Description: ADC value by press the pedal forward to the end position, value > O57

O57¶

-Max: 4095
-Min: 0
-Unit: –
-Description: ADC value of the border between POSITION 2 and POSITION 1, O58 < value < O56

O58¶

-Max: 4095
-Min: 0
-Unit: –
-Description: ADC value of the border between POSITION 1 and POSITION 0, O59 < value < O57

O59¶

-Max: 4095
-Min: 0
-Unit: –
-Description: ADC value of the border between POSITION 0 and POSITION -1, O60 < value < O58

O60¶

-Max: 4095
-Min: 0
-Unit: –
-Description: ADC value of the border between POSITION -1 and POSITION -2, O61 < value < O59

O61¶

-Max: 4095
-Min: 0
-Unit: –
-Description: ADC value by press the pedal backward to the end position, value < O60.

O62¶

O63¶

-Max: 5
-Min: 0
-Unit: –
-Description: The relation of pedal input and speed:

0 = linear;

1 = 2 lines;

2 = Curve 1: start slowly, end fast;

3 = Curve 2: start fast, end slowly;

4 = S curve 1: start slowly, middle fast, end slowly;

5 = S curve 2: start fast, middle slowly, end fast.

O80¶

-Max: 3
-Min: 0
-Unit: –
-Description: Select Keypad Type:

0 = none；

1 = 6 keys;

2 = 7 keys;

3 = 12 keys.