Service counter¶

Using service counter allows users to remind regular mechanical maintenance.

Quick start¶

Following steps:

Set an appropriate value for A62, every time N stitches are sewn which set by this parameter, the counter value A63 increases by 1.
Set an appropriate value for A61, this is a very variable value, which depends on how often you want to maintain.
Set A60 to 1, enable the counter.
Refer to the beginning of this chapter Service Remaining Amount, as the sewing, the remaining amount is counted down, when it reaches 0, the machine will stop, and the controller will throw a warning. If you want to continue, you need to perform a reset operation.

(1)¶\[N_{\text{Remaining amount}} = A61_{\text{reset value of the service counter}} - A63_{\text{service counter value}}\]

This table summarizes which parameter should be used for service counter:

A60¶

A61¶

A62¶

-Max: 200
-Min: 1
-Unit: stitches
-Description: Every sew over this number of stitches,increment the counter by 1.

A63¶