Thread wiper¶

Thread wiper has two different action modes:

Mode 1

Set A08 to 1 to enable this function.

When thread trimmer is completed and the time set by T03 is delayed, the wiper will switch on, it will switch off after the time set by T04.
Mode 2

Set A08 to 2 to enable this function.

When thread trimmer is completed, while lifting the foot for the first time, the wiper will switch on, it will switch off after the time set by T04.

Quick reference¶

This table summarizes which parameter should be used for wiper:

A08¶

T03¶

T04¶